Arduino Infrared Obstacle Avoidance Detection Photoelectric Sensor
|
Model |
E18-D50NK |
|
Quantity |
1 |
|
Color |
Black + Orange |
|
Material |
ABS |
|
Features |
Transmitter and receiver photoelectric sensor set; Voltage: DC 5V, current: 100mA, detection range: 3~80cm (adjustable); with potentiometer and output indicator light on the back |
|
Other |
Useful for robot, interactive media, industrial assembly line, etc. |
|
Packing List |
1 x Photoelectric senso |
Arduino infrared switch is an integrated transmitter and receiver as one of the reflective photoelectric sensor, the sensor has a detection distance, through the back of the potentiometer to adjust the measuring range, without the addition of the modulated signal, by the visible light interference is small, cheap and easy to assemble.easy to use features, widely used in robot obstacle avoidance, process lines and other occasions.
The measuring range of the infrared switch given by the manufacturers range from 3cm-80cm, but this product is not a precision sensor, measuring range with a certain error.
Technical parameters:
1) Voltage: 5VDC
2) Current: 100mA
3) measuring range :3-80CM
4) NPN normally open type
5) The back adjustment potentiometer and the output indicator
6) pin definitions: red power, green power is negative, the yellow signal output.
7) have been processed DuPont plug directly into an Arduino sensor expansion board use.
8) Probe Diameter: 18mm
9) Probe Length: 43mm
10) Lead Length: 30cm
Applications:
1) production line goods automatic counting device
2) multi-functional reminder
Related sensor Frequently Asked Questions answered:
1) Q: This is a digital sensor or analog sensors?
A: This is a digital sensor, NPN normally open type photoelectric switch; output state is 0, 1, in digital circuits, low and high, the output of the normal state of high to detect the target output low.
2) Q: Can connected to the microcontroller IO port?
A: can be directly connected to the microcontroller IO port.
3) Q: How much to pull the resistance?
A: The pull-up resistor is generally about 10K;
4) Q: Why is connected to the power indicator is always on?
A: Firstly, to ensure that power is stable 5V ± 2%, followed by the probe output can not be connected to the microcontroller output port;
5) Q: Why is connected to the infrared switching power supply, the indicator is always on?
A: 1, check the power reversed, that is, the infrared output to the power is;, check the probe to the detection range, there are no obstructions in the right direction, preferably in front of the open direction.
6) Q: manual description is too simple?
A: This is a photoelectric switch, only three lines, power supply, the output does not require too complex to introduce.
7) Q: I want to know the original and the internal circuit diagram of the sensor internal work.
A: I want to, but the factory does not give.
Product Tags:
|
|
Arduino Infrared Obstacle Avoidance Detection Photoelectric Sensor Images
|
